| Model | HZ560DJK |
| Pre-milling power | 1.8kw*2 |
| Pre-milling motor for L shape | 4kw |
| Ending trimming power | 0.37kw*2 |
| Rough trimming power | 0.75kw*2 |
| Fine trimming power | 0.75kw*2 |
| Corner rounding power | 0.37kw*2 |
| Feeding power | 3.7kw |
| Edge band thickness | 0.4-3mm |
| Edge band Max. width | 60mm |
| Min length of workpiece | 80mm |
| Feeding speed | 12-20m/min |
| Air pressure | 0.7Mpa |
| Total power | 19.78kw |
| Overall dimension | 9400*900*1600mm |
| Weight | 3000kg |
8. Corner trimming group: It makes corner of board smooth and beautiful.9. Scraping Group: It makes the surface perfect finishing after the borads be scraped
10. Flat scraping group: It can clean extra adhesive on the board11. Double Buffing groups: It has four polishing wheels and four motors. The edge of board is very mooth after the boards are polished.
12. Hogging: Make a straight groove on the bottom or top of boards .
7. Fine trimming group: It has two individual high- frequency motors and can trim the exceeding edge on the boards . It makes R2 on surface of edge band.
6. Rough trimming group: It has two individual high- frequency motors and can trim the exceeding edge on the board roughly.5. End trimming group: It works by a precise guide track movement. The structure of automatic tracking and high -frequency motors ensure the surface of edge band smooth after cutting.
2. Glue tank group: It has two glue tanks. One is for coating straight surface of boards and the other is for coating bevel of boards. It is designed a special structure to coat adhesive on edge band and boards uniformly. They can bond together firmly.
4. Heater: It is for heating edge band.3. Pre-milling group: It has double milling units. One is for milling straight surface of boards and the other It is for milling bevel of boards.
